High Efficiency Motor IE3

High efficiency motor ie3 uses high quality cold rolled silicon steel sheets and high efficiency bearings. It works based on the principle of electromagnetic induction, and converts electrical energy into mechanical energy through the interaction between the rotating magnetic field generated by the stator and the conductor in the rotor.

1. The material can be increased, such as increasing the outer diameter of the Y2-8024 motor core (from φ120 to φ130, and φ145 in foreign countries), length (from 70 to 90), and increasing the size of the stator slot, so that the amount of iron used in each motor increases by 3kg and the copper wire increases by 0.9kg.

2. High-quality cold-rolled silicon steel sheets, such as DW470 or even DW270, and low-loss cold-rolled sheets can be used to replace the hot-rolled sheets with high iron loss in the past. .

Product Features

1. Excellent Energy Efficiency

The efficiency of this series of motors meets the GB18613-2020 three-level energy efficiency standard. Compared with the YX3 series, the average efficiency is increased by 2%-3%, and compared with the ordinary Y2 series, it is about 10% higher. It has a relatively flat efficiency characteristic in the 50-100% load range.

2. High-quality Insulation
The high-efficiency motor ie3 uses F/H grade insulation materials, with F grade resistant to 155°C and H grade resistant to 180°C.

3. Stable Protection
The high-efficiency motor ie3 has a protection level of IP55/IP65, with good dustproof and waterproof performance, and can operate stably in harsh environments.