extruder motor has a series of characteristics such as small size, high torque, and high overload ratio. Suitable for various industrial devices that require speed regulation, such as extruders, machine tools, etc.
Motor performance:
| Motor power | 15KW-1250KW |
| Motor levels | 2, 4, 6, 8, 10, 12 levels |
| Rated voltage | 380V, other voltages can also be selected |
Rated frequency: 50Hz, 20Hz, 25Hz, 33.3Hz, 60Hz can also be selected as needed. Under open-loop U/f control, constant torque speed regulation is used from 3Hz to rated frequency, and constant power speed regulation is used from rated frequency to the given maximum frequency; Under the condition of vector control, the constant torque speed regulation range can be expanded from zero speed to base speed.
The benchmark working system for the extruder motor is S1, and other working systems can also be used as needed.
extruder motor Insulation level: F level
The standard protection level is IP23. If an air-water cooler or an air-to-air cooler is installed, the motor protection level can be increased to IP44, IP54, etc.
The standard cooling method is strong wind cooling IC06, but it can also be made with independent cooler cooling or pipeline air cooling as needed.
The motor has strong overload capacity, and the overload multiple it can withstand at rated frequency is shown in the technical data sheet, lasting for 1 minute.
The standard outgoing direction of the motor is the right outgoing line (viewed from the shaft extension end), which can also be changed to the left or upper outgoing line according to user needs.
form11
|
Model |
B |
L |
|
YJP180K |
420 |
830 |
|
YJP180S |
480 |
890 |
|
YJP180M |
540 |
950 |
|
YJP180L |
600 |
1010 |
|
YJP180P |
660 |
1070 |
form12
|
Mode |
B |
L |
|
YJP200K |
560 |
990 |
|
YJP200S |
620 |
1050 |
|
YJP200M |
680 |
1110 |
|
YJP200L |
740 |
1170 |
|
YJP200P |
780 |
1210 |
Temperature measuring components are installed inside the motor, and an air heater can be added.
The non shaft extension end of the motor can be equipped with accessories such as encoders and overspeed switches.
The motor is configured with a cooling fan voltage of three-phase 380V or other voltages.
The extruder motor, with its unique internal ventilation and heat dissipation structure and excellent and reliable insulation structure, effectively improves the heat dissipation effect of the motor. The fully laminated inorganic seat structure improves the utilization rate of materials, reducing the center energy of the motor corresponding to the same torque by two to three levels compared to ordinary motors.
extruder motor is specially designed to match various high-performance IGBT pulse width modulation frequency converters at home and abroad, and generally does not require an external filter when in use.
| ●4极(poles)50Hz form 6 | ||||||||
YJP series motor:4 poles,50Hz,380V,1500rpm,IP23,IC06 |
||||||||
| Motor Model | Rated Current | Rated Current |
Rated Torque |
Max. overlcead (time) |
Frequency range at cunstant torque |
Fregueney runge at constant output |
(J) Mxnent of Inertia |
Wt. |
| kW | A | N ·m | times | Hz | Hz | kg ·m² | kg | |
| YJP132M-4 | 22 | 44 | 140 | 2.5 | 5-50 | 50-100 | 0.147 | 160 |
| YJP132L-4 | 30 | 59 | 191 | 2.5 | 5-50 | 50-100 | 0.179 | 180 |
| YJP160S-4 | 37 | 69 | 240 | 2.5 | 5-50 | 50-100 | 0.215 | 250 |
| YJP160M-4 | 45 | 85 | 293 | 2.5 | 5-50 | 50-100 | 0.259 | 285 |
| YJP160L-4 | 55 | 102 | 359 | 3.0 | 5-50 | 50-100 | 0.303 | 320 |
| YJP180K-4 | 75 | 138 | 489 | 3.0 | 5-50 | 50-100 | 0.626 | 355 |
| YJP180S-4 | 90 | 164 | 585 | 3.0 | 5-50 | 50-100 | 0.706 | 405 |
| YJP180M-4 | 110 | 200 | 715 | 3.0 | 5-50 | 50-100 | 0.829 | 465 |
| YJP180L-4 | 132 | 241 | 858 | 3.0 | 5-50 | 50-100 | 0.951 | 520 |
| YJP200M-4 | 160 | 288 | 1035 | 3.0 | 5-50 | 50-100 | 1.68 | 680 |
| YJP200L-4 | 185 | 333 | 1196 | 3.0 | 5-50 | 50-100 | 1.88 | 750 |
| YJP225L-4 | 200 | 359 | 1296 | 3.0 | 5-50 | 50-100 | 2.28 | 790 |
| YJP225P-4 | 220 | 390 | 1427 | 2.6 | 5-50 | 50-75 | 2.57 | 880 |
| YJP225X-4 | 250 | 440 | 1623 | 2.6 | 5-50 | 50-75 | 2.91 | 970 |
| YJP225XL-4 | 280 | 496 | 1816 | 2.6 | 5-50 | 50-75 | 3.31 | 1050 |
| YJP280K-4 | 315 | 560 | 2037 | 2.6 | 5-50 | 50-75 | 4.07 | 1200 |
| YJP280S-4 | 355 | 625 | 2295 | 2.6 | 5-50 | 50-75 | 4.77 | 1330 |
| YJP280M-4 | 400 | 699 | 2587 | 2.6 | 5-50 | 50-75 | 5.52 | 1490 |
| YJP280L-4 | 450 | 799 | 2901 | 3.0 | 5-50 | 50-75 | 6.28 | 1645 |
| YJP280P-4 | 500 | 870 | 3232 | 2.6 | 5-50 | 50-75 | 6.92 | 1780 |
| YJP280X-4 | 560 | 976 | 3617 | 2.6 | 5-50 | 50-75 | 7.68 | 1940 |
| YJP355K-4 | 630 | *617 | 4056 | 2.6 | 5-50 | 50-75 | 8.89 | 1980 |
| YJP355S-4 | 710 | *689 | 4571 | 2.6 | 5-50 | 50-75 | 10.9 | 2290 |
| YJP355M-4 | 800 | *774 | 5144 | 2.6 | 5-50 | 50-75 | 12.6 | 2650 |
| YJP355L-4 | 900 | *870 | 5802 | 2.6 | 5-50 | 50-75 | 14.4 | 3010 |
| YJP355P-4 | 1000 | *964 | 6439 | 2.6 | 5-50 | 50-75 | 16.2 | 3370 |
| 注：1) Current when rated voltage is 660V 2)Pls instruct if Max.frequency exceeds the above listed data |
||||||||
Hot Tags: extruder motor, China extruder motor manufacturers, suppliers, factory, variable frequency motor for custom application, variable frequency motor for drill, variable frequency motor for juicer, variable frequency motor for router, variable frequency motor for specific requirement, variable frequency motor for variable speed application
